GovHandbook

CD zone in Anmore: Comprehensive Development

Anmore, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-08

In short

Comprehensive residential development under the Official Community Plan, with one-family housing as the principal use

Zone rules

PurposeComprehensive residential development under the Official Community Plan, with one-family housing as the principal use
Main usesOne-Family Dwelling
Also allowed (secondary uses)Secondary Suite
Minimum lot area1,012 m²
Maximum lot coverageSet by the approved Comprehensive Development Plan, but no more than 25% (parcel size 2,023 m²), 25% (1,349 m²), 20% (1,012 m²)
Maximum density0.28 FAR or 0.30 FAR for principal buildings, by parcel size range (2,023 m², 1,349 m², 1,012 m²); see table
Maximum height11 m
Maximum height, accessory buildings7 m (1 accessory building, up to 45 m²)
Front setbackAs set by the approved Comprehensive Development Plan, but never less than the RS-1 setback
Rear setbackAs set by the approved Comprehensive Development Plan, but never less than the RS-1 setback
Interior side setbackAs set by the approved Comprehensive Development Plan, but never less than the RS-1 setback
Street side setbackAs set by the approved Comprehensive Development Plan, but never less than the RS-1 setback
Other rulesNumber of principal buildings, parking and open amenity space must follow the approved Comprehensive Development Plan

Source: Zoning Bylaw No. 568-2017 (consolidated; the consolidation lists amendments through Bylaw No. 745-2026), s. 9.13 (read 2026-11-08)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated copy provided for convenience only. Schedule A (Zoning Map) is pages 101 to 104 of the PDF and has no text layer. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Anmore zones · Report an error