RS-1A zone in Anmore: Residential 1A
In short
One-family residential housing as the principal use
Zone rules
| Purpose | One-family residential housing as the principal use |
|---|---|
| Main uses | One-Family Dwelling |
| Also allowed (secondary uses) |
|
| Minimum lot area | 2,023 m² (parcels as small as 1,348 m² may be considered in compelling circumstances) |
| Maximum lot coverage | 20% of the parcel |
| Maximum density | Subdivision: gross density of 2.04 parcels per acre; floor area 0.25 FAR for the principal building |
| Maximum height | 11 m |
| Maximum height, accessory buildings | 7 m (accessory buildings); 7 m (coach house) |
| Front setback | 10 m (7.6 m for a parcel under 4,047 m²) |
| Rear setback | 7.6 m |
| Interior side setback | 5 m |
| Street side setback | 7.6 m |
| Accessory building setbacks | front 10 m, rear 7.6 m, exterior side 7.6 m, interior side 5 m (rear and interior side may be 3.5 m for accessory buildings under 10 m² and in-ground swimming pools; may be 1 m for one accessory building on parcels under 1200 m²) |
| Other rules |
|
Source: Zoning Bylaw No. 568-2017 (consolidated; the consolidation lists amendments through Bylaw No. 745-2026), s. 9.2 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated copy provided for convenience only. Schedule A (Zoning Map) is pages 101 to 104 of the PDF and has no text layer. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Anmore zones · Report an error