M2 zone in Burns Lake: Heavy Industrial
Industries with significant primary processing, resource extraction and outside storage that are generally not compatible with non-industrial uses.
Zone rules
| Purpose | Industries with significant primary processing, resource extraction and outside storage that are generally not compatible with non-industrial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,200 m² |
| Minimum lot width | 30 m |
| Maximum lot coverage | 40% for all buildings and structures |
| Maximum density | Floor area ratio 0.75 |
| Maximum height | 18 m |
| Maximum height, accessory buildings | 26 m |
| Front setback | 10 m |
| Rear setback | 7.5 m |
| Interior side setback | 4.5 m |
| Street side setback | 10 m |
| Accessory building setbacks | same as principal buildings: front 10 m, interior side 4.5 m, exterior side 10 m, rear 7.5 m |
Source: Zoning Bylaw No. 880, 2008 (consolidated up to April 2026, Schedules 1, 2 and 3), s. 10.2 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the official bylaws and amendments adopted by Council prevail. R7 (s. 8.3) is in the bylaw text but not in its s. 5.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Burns Lake zones · Report an error