RR1 zone in Burns Lake: Rural Residential
In short
Rural residential lots outside intensive urban development areas.
Zone rules
| Purpose | Rural residential lots outside intensive urban development areas. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 2 ha |
| Minimum lot width | 50 m |
| Maximum lot coverage | 15% for all buildings and structures |
| Maximum density | 1 principal dwelling per 2 ha |
| Maximum height | 11 m (principal dwelling); 12 m (farm buildings and structures) |
| Maximum height, accessory buildings | 8 m |
| Front setback | 9 m |
| Rear setback | 9 m |
| Interior side setback | 3 m |
| Street side setback | 5 m |
| Accessory building setbacks | front 9 m, interior side 3 m, exterior side 5 m, rear 3 m |
| Other rules | Farm buildings and structures have their own setbacks by type of agriculture (Tables 6.1.1a and 6.1.1b). |
Source: Zoning Bylaw No. 880, 2008 (consolidated up to April 2026, Schedules 1, 2 and 3), s. 6.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the official bylaws and amendments adopted by Council prevail. R7 (s. 8.3) is in the bylaw text but not in its s. 5.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Burns Lake zones · Report an error