R-I zone in Campbell River: Residential Infill
In short
Residential development of up to four units.
Zone rules
| Purpose | Residential development of up to four units. |
|---|---|
| Main uses |
|
| Minimum lot area | 350 m² |
| Minimum lot width | 10 m (frontage) |
| Maximum lot coverage | 50% (all buildings); 70% (impermeable surfaces) |
| Maximum density | 3 dwelling units on lots under 280 m² and 4 dwelling units on lots over 280 m², within the urban containment boundary |
| Maximum height | Lesser of 7.0 m or 2 storeys if the dwelling unit is set back at least 3.0 m from the rear property line; lesser of 10.0 m or 3 storeys if set back at least 5.0 m from the rear property line; 8 m above highway grade or 3.0 m below ridge top on certain Island Highway 19A lots |
| Front setback | 4.0 m; 6.0 m in front of the opening to a garage or carport; 1.5 m for strata lots if parking requirements are met |
| Rear setback | 3.0 m (1.5 m if the entire rear yard abuts a lane); 5.0 m for strata lots |
| Interior side setback | 1.2 m; 0.0 m for attached units on strata lots, or 1.5 m to a strata lot line for end units or detached units |
| Street side setback | 3.5 m |
| Other rules | Minimum 2.5 m between buildings. |
Source: Zoning Bylaw No. 3250, 2006 (consolidated to Bylaw 4021, 2026; last amended October 1, 2026), s. 5.24 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says the consolidation is not a legal document and was combined with the amendments purely for convenience; consult certified copies of the original bylaws for interpretation. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Campbell River zones · Report an error