I1 zone in Clinton: Light Industrial
In short
Accommodate light industrial operations in locations and under development standards that minimize conflict with adjacent uses.
Zone rules
| Purpose | Accommodate light industrial operations in locations and under development standards that minimize conflict with adjacent uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | Lot 1 District Lot 1060 Lillooet District Plan KAP68363 (60 Boyd Pit Rd): Vehicle Service and Repairs |
| Minimum lot area | 0.1 ha, 1.011 m² (0.25 ac)Area is stated in the bylaw as written ("1.011 m2"), which looks like a typo. |
| Maximum lot coverage | 60% |
| Maximum height | 12.0 m (39.0 ft.) |
| Front setback | 6.0 m (20.0 ft.) |
| Rear setback | 3.0 m (10.0 ft.) |
| Interior side setback | 3.0 m (10.0 ft.) |
| Street side setback | 3.0 m (10.0 ft.) |
| Accessory building setbacks | front 6.0 m (20.0 ft.), interior side 3.0 m (10.0 ft.), exterior side 3.0 m (10.0 ft.), rear 1.5 m (5.0 ft.) |
| Other rules |
|
Source: Village of Clinton Zoning Bylaw No. 607, 2025, s. 12 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The bylaw repeals Zoning Bylaw No. 439, 2007 and all its amendments. The Village lists it as a new bylaw, not a consolidation. The zoning map is Schedule B. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Clinton zones · Report an error