RM-2 zone in Comox: Low-Rise Residential
A transition between the Downtown and surrounding residential neighbourhoods, with low-rise multi-unit residential up to four storeys.
Zone rules
| Purpose | A transition between the Downtown and surrounding residential neighbourhoods, with low-rise multi-unit residential up to four storeys. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,500.0 m² |
| Minimum lot width | 30.0 m |
| Maximum lot coverage | 50% (60% including impervious surfaces) |
| Maximum density | Maximum FAR 1.6; minimum 55 units per ha |
| Maximum height | 16.0 m (4 storeys) |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 4.5 m |
| Rear setback | 5.0 m |
| Interior side setback | 3.5 m |
| Street side setback | 3.5 m |
| Accessory building setbacks | front 3.0 m, side 1.2 m, rear 1.2 m, exterior side 3.0 m; 0.0 m for an accessory building under 10.0 square metres of floor area (not in a front or exterior side yard) |
| Other rules |
|
Source: Zoning Bylaw No. 2056 (consolidated as at July 8, 2026), s. 10 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Replaces Zoning Bylaw No. 1850 (adopted early 2026). Zones in Sections 9 to 15 share tables, so those zones all point to their whole section's line range; only the CD zones (Section 16) have their own ranges. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Comox zones · Report an error