R3 zone in Creston: Residential - Medium Density Zone
In short
Multi-family development (typically townhouse, rowhouse, triplex and fourplex dwellings) and pocket neighbourhoods, in addition to single family and duplex dwellings
Zone rules
| Purpose | Multi-family development (typically townhouse, rowhouse, triplex and fourplex dwellings) and pocket neighbourhoods, in addition to single family and duplex dwellings |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1000 m² |
| Minimum lot width | 15 m |
| Maximum lot coverage | 75% |
| Maximum density | 60 dwelling units per hectare |
| Maximum height | 9.2 m (single family, duplex, non-residential principal building); 11.0 m (multi-family dwelling) |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 6.1 m |
| Rear setback | 1.5 m (where lot abuts a lane); 3.0 m (where no lane exists) |
| Interior side setback | 3.0 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | Same as principal buildings (setbacks apply to all buildings and structures, whether or not the accessory building is attached) |
| Other rules |
|
Source: Zoning Bylaw No. 1958, 2022 (consolidated to June 16, 2026), s. 7.4 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The R2 (Residential - Zero Lot Line) zone is shown in the bylaw as "DELETED BL#2007", so it is not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Creston zones · Report an error