RM-3 zone in Esquimalt: Multiple Family Residential
Accommodate high density Townhouse or low density Apartment development.
Zone rules
| Purpose | Accommodate high density Townhouse or low density Apartment development. |
|---|---|
| Main uses |
|
| Maximum lot coverage | 25% for all buildings and structures combined; accessory buildings and structures combined 10% |
| Maximum density | Floor Area Ratio 0.60 |
| Maximum height | 9 m |
| Maximum height, accessory buildings | 4 m |
| Front setback | 7.5 m |
| Rear setback | 7.5 m |
| Interior side setback | 4.5 m from interior side lot line |
| Street side setback | 3.6 m from exterior side lot line |
| Accessory building setbacks | front: not in front of the front face of the principal building; side: 1.5 m interior, 3.6 m exterior; rear: 1.5 m; at least 2.5 m from principal building |
| Other rules | Usable open space: at least 7.5% of the parcel area |
Source: Zoning Bylaw, 1992, No. 2050 (consolidated for convenience to September 3, 2026), s. 43 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; in case of discrepancy the original bylaw or amending bylaws must be consulted. Zone sections are in Part 5 (ss. 34 to 67); Comprehensive Development districts are s. 67.x. Abandoned, defeated and rescinded CD numbers are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Esquimalt zones · Report an error