I1 zone in Fraser Lake: Light Industrial

Fraser Lake, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-08

In short

Some service commercial uses and light industrial development

Zone rules

Purpose	Some service commercial uses and light industrial development
Main uses	Animal Clinic Contractor Services Light Industrial Office Use Outdoor Storage Recreation Vehicle Sales Service Commercial Service Station, Minor Service Station, Major Vehicle Wash
Also allowed (secondary uses)	Accessory Buildings and Structures
Minimum lot width	20 m
Maximum lot coverage	75%
Maximum height	11 m
Maximum height, accessory buildings	6.0 m
Front setback	6.0 m
Rear setback	3.0 m
Interior side setback	3.0 m
Street side setback	5.5 m
Accessory building setbacks	front 3.0 m, rear 3.0 m, interior side 3.0 m, exterior side 3.0 m
Other rules	Minimum 3.0 m between buildings

Source: Bylaw 875, 2025 Zoning Bylaw (Village's "Consolidated Zoning Bylaw" PDF, adopted November 26, 2025), s. 6.7 (read 2026-11-08)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Village's section 6.1 to 6.12 headings give the industrial zones as I1 and I2, while the zone table (section 6 table) lists them as M1 and M2; the zone sections and their regulation tables use I1 and I2, which are used here. Schedule B (the zoning map) is in the same PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Fraser Lake zones · Report an error