P2 zone in Fraser Lake: Municipal Use
Institutional uses typically operated by the Village of Fraser Lake
Zone rules
| Purpose | Institutional uses typically operated by the Village of Fraser Lake |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Accessory Buildings and Structures |
| Minimum lot width | 15 m |
| Maximum lot coverage | 75% |
| Maximum height | 11 m |
| Maximum height, accessory buildings | 6.0 m |
| Front setback | 3.0 m |
| Rear setback | 3.0 m |
| Interior side setback | 3.0 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | front 1.5 m, rear 1.5 m, interior side 1.5 m, exterior side 1.5 m |
| Other rules | Minimum 3.0 m between buildings |
Source: Bylaw 875, 2025 Zoning Bylaw (Village's "Consolidated Zoning Bylaw" PDF, adopted November 26, 2025), s. 6.10 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Village's section 6.1 to 6.12 headings give the industrial zones as I1 and I2, while the zone table (section 6 table) lists them as M1 and M2; the zone sections and their regulation tables use I1 and I2, which are used here. Schedule B (the zoning map) is in the same PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Fraser Lake zones · Report an error