I1 zone in Fruitvale: General Industrial
A zone for general industrial uses.
Zone rules
| Purpose | A zone for general industrial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1.0 ha, or 4000 m² if connected to the community sanitary sewer system |
| Minimum lot width | 40.0 m |
| Maximum lot coverage | 60% |
| Maximum density | Floor area ratio 1.5 |
| Maximum height | 14.0 m |
| Front setback | 7.5 m |
| Rear setback | 0.0 m where adjacent to commercial or industrial zones; 6.0 m abutting other zones |
| Interior side setback | 4.5 m (not required abutting a lot in the C or I zones) |
| Street side setback | 6.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 846, 2013 (consolidated for convenience February 26, 2026), s. 16.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Village says its posted bylaws are provided for convenience only and are not official versions; only the signed printed version issued by the Chief Administrative Officer is official. RD1 (14.6) and RM2D (14.7) are in the bylaw sections but not in the s. 2.3.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Fruitvale zones · Report an error