RM2 zone in Fruitvale: Medium Density Multiple Housing
A zone primarily for medium density apartments and compatible secondary uses on serviced urban lots.
Zone rules
| Purpose | A zone primarily for medium density apartments and compatible secondary uses on serviced urban lots. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1400 m² |
| Minimum lot width | 30.0 m |
| Maximum lot coverage | 40%, and 60% for buildings, driveways and parking areas together |
| Maximum density | Floor area ratio 1.0 (up to 1.3 with a density bonus amenity; up to 0.2 more for screened parking beneath buildings; 0.1 more with a housing agreement) |
| Maximum height | Lesser of 12.4 m or 3 storeys (lesser of 16.5 m or 4 storeys with a density bonus amenity) |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 6.0 m |
| Rear setback | 9.0 m (7.5 m where there is a rear lane) |
| Interior side setback | 4.5 m for a portion of a building not over 2½ storeys; 7.5 m for portions over 2½ storeys |
| Street side setback | 7.5 m |
| Accessory building setbacks | rear 6.0 m; an accessory building with recreational amenities for all residents follows the principal building setbacks |
| Other rules |
|
Source: Zoning Bylaw No. 846, 2013 (consolidated for convenience February 26, 2026), s. 14.4 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Village says its posted bylaws are provided for convenience only and are not official versions; only the signed printed version issued by the Chief Administrative Officer is official. RD1 (14.6) and RM2D (14.7) are in the bylaw sections but not in the s. 2.3.1 zone table. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Fruitvale zones · Report an error