GovHandbook

RM1 zone in Kent: Multiple Dwelling Residential 1 Zone

Kent, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Attached multiple dwelling housing at a density no higher than 50 units per hectare (20 units per acre) on lots with an approved community water and sewer system.

Zone rules

PurposeAttached multiple dwelling housing at a density no higher than 50 units per hectare (20 units per acre) on lots with an approved community water and sewer system.
Main uses
  • apartment
  • townhouse
  • personal care
Also allowed (secondary uses)
  • accessory building
  • off-street parking
  • home occupation
  • secondary suite
Minimum lot area880 square metres (9,500 square feet) (townhouse and personal care); 1,300 square metres (14,000 square feet) (apartment)
Minimum lot width22 metres (72 feet)
Maximum lot coverage40% (all buildings and structures)
Maximum density50 units per hectare (20 units per acre)
Maximum height12 metres (40 feet) (all residential buildings)
Maximum height, accessory buildings3.7 metres (12 feet)
Front setback6.0 metres (20 feet) (townhouse and personal care); 7.5 metres (25 feet) (apartment)
Rear setback4.5 metres (15 feet) (townhouse and personal care); 7.5 metres (25 feet) (apartment)
Interior side setback3.5 metres (12 feet) (townhouse and personal care); 7.5 metres (25 feet) (apartment)
Street side setback6.0 metres (20 feet) (townhouse and personal care); 7.5 metres (25 feet) (apartment)
Other rules
  • Each dwelling unit: 32.5 square metres (350 square feet) minimum plus 14 square metres (150 square feet) for each bedroom
  • Off-street parking may cover no more than 30% of the lot area unless concealed

Source: Zoning Bylaw No. 1219, 2001 (consolidated October 6, 2025), s. 9.5.1 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District's consolidation is for convenience only and is not a legal document; certified copies of the original bylaws should be consulted. Resource Management Zone (MR) and Resource Management Industrial Zone (MR1) share one section (9.9.1), so they share one line range. The PDF is hosted on the District's website CDN (linked from kentbc.ca). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Kent zones · Report an error