RM1 zone in Keremeos: Medium Density Residential One
In short
Comprehensively designed low profile multiple attached housing up to two storeys high.
Zone rules
| Purpose | Comprehensively designed low profile multiple attached housing up to two storeys high. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | Lot 1, Plan KAP10857, District Lot 174, SDYD (shown on Figure 12.1.10(a)): maximum density 54 dwelling units per hectare; no amenity space requirement for each dwelling unit |
| Minimum lot area | 0.1 ha (municipal sewer); 1.0 ha (no municipal sewer) |
| Minimum lot width | 20.0 metres |
| Maximum lot coverage | 50% |
| Maximum density | 50 dwelling units per hectare |
| Maximum height | 15.0 m |
| Front setback | 4.5 m |
| Rear setback | 6.0 m |
| Interior side setback | 2.5 m |
| Street side setback | 4.0 m |
| Accessory building setbacks | front 6.0 m, rear 3.0 m, interior side 2.5 m, exterior side 4.0 m |
| Other rules | Amenity space per dwelling unit: studio suite 7.5 m²; one bedroom 15.0 m²; two or more bedrooms 25.0 m² (at least 25% of it at grade). |
Source: Zoning Bylaw No. 851 (revised June 10, 2026; consolidated for convenience with amendment bylaws 851-01 to 851-11), s. 12.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience. Section 5.1 also lists RS2, RS3 and RD1 but the consolidation has no section for them. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Keremeos zones · Report an error