P1 zone in Langford: Neighbourhood Institutional
Accommodate community and civic operations as well as institutional uses.
Zone rules
| Purpose | Accommodate community and civic operations as well as institutional uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 695 m² |
| Minimum lot width | 16 m (52.5 ft) |
| Maximum lot coverage | 40%; 45% on Lot A, Section 81, Esquimalt District, Plan 26335, Except Part in Plan VIP82658 (911 Jenkins Avenue) |
| Maximum density | Floor area ratio 1.0; 2.5 on land listed in Table 1 of Schedule “AD” if the owner pays the amount specified there before a Building Permit is issued |
| Maximum height | 12 m (39.4 ft) |
| Front setback | 7.5 m (24.6 ft) (front lot line or exterior side lot line) |
| Rear setback | 10 m (32.8 ft) |
| Interior side setback | 6 m (19.7 ft) |
| Street side setback | 7.5 m (24.6 ft) (front lot line or exterior side lot line) |
| Other rules |
|
Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.80 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Langford zones · Report an error