RR1 zone in Langford: Rural Residential 1
Permit one-family residential uses on large rural lots.
Zone rules
| Purpose | Permit one-family residential uses on large rural lots. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,500 m²; 1 ha unless serviced by municipal sanitary sewer |
| Minimum lot width | 20 m (also minimum lot depth 34 m) |
| Maximum lot coverage | 35% for the residential building; 50% for all buildings and structures |
| Maximum density | One dwelling unit per lot (not counting a suite); on lots of 280 m² or less up to 3 units; on lots 281 m² to 4,047 m² up to 4 units; dwelling gross floor area max 600 m²; floor area ratio 0.55 for residential and accessory buildings combined |
| Maximum height | 11 m |
| Front setback | 7.5 m |
| Rear setback | 7.5 m |
| Interior side setback | 3 m |
| Street side setback | 7.5 m |
Source: Zoning Bylaw No. 300, 1999 (consolidated 5 Oct 2026), s. 6.10 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; copies of the original bylaw and amendments are at Langford City Hall. Parking (Part 4) and the Schedules are also published as separate PDFs on the bylaws page; the main PDF includes Part 4 and Schedule text. The zoning map (Schedule B) is not in the PDF. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Langford zones · Report an error