C-2D zone in Township of Langley: Community Commercial
Main uses: all uses permitted in the Community Commercial Zone C-2 except retail stores exceeding a maximum size of 450m2, gas bars.
Zone rules
| Main uses |
|
|---|---|
| Maximum lot coverage | 40% of the lot area; up to 60% where at least 50% of the required parking spaces are within the building or underground |
| Maximum height | 12 m |
| Front setback | 0 m from any lot line abutting a C, M or P zone or lands designated for Industrial, Business Park or Commercial purposes in a Community Plan; 3.0 m from any lot line abutting any other zone or Community Plan designation |
| Rear setback | 0 m from any lot line abutting a C, M or P zone or lands designated for Industrial, Business Park or Commercial purposes in a Community Plan; 3.0 m from any lot line abutting any other zone or Community Plan designation |
| Interior side setback | 0 m from any lot line abutting a C, M or P zone or lands designated for Industrial, Business Park or Commercial purposes in a Community Plan; 3.0 m from any lot line abutting any other zone or Community Plan designation |
| Other rules | All commercial uses must be conducted within a completely enclosed building, except accessory display, storage, parking and loading areas, outdoor commercial recreation uses, eating areas and seasonal uses |
Source: Township of Langley Zoning Bylaw 1987 No. 2500 (consolidated to Bylaw 6235, July 13, 2026), s. 602D (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Township publishes the bylaw as nine section PDFs (each zone's source_url, pdf_page counts within that PDF). It is consolidated for convenience only and the Township does not warrant it is current. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Township of Langley zones · Report an error