GovHandbook

R1S zone in Logan Lake: Single Family Residential with Secondary Suite

Logan Lake, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-08

In short

Single family dwellings on lots greater than 600 m², with a secondary suite allowed on lots rezoned to R1S.

Zone rules

PurposeSingle family dwellings on lots greater than 600 m², with a secondary suite allowed on lots rezoned to R1S.
Main usesSingle Family Dwelling
Also allowed (secondary uses)
  • Home Occupation
  • Secondary Suite
  • Accessory Use
Minimum lot area600 m² for new subdivisions
Minimum lot width18 m for new subdivisions
Maximum lot coverage40%
Maximum density1 single family dwelling per parcel
Maximum height10 m
Front setback5 m
Rear setback5 m
Street side setback3 m
Accessory building setbacksfront: no closer than the principal building; rear 1 m; interior side 1 m; exterior side 3 m
Other rules
  • Minimum floor area of single family dwelling: 85 m²
  • Accessory buildings combined maximum floor area: 50 m²
  • Secondary suite: one per dwelling, only inside a single family dwelling, and must connect to municipal sewer and water
  • Secondary suite is permitted on a property rezoned to R1S

Source: Zoning Bylaw No. 675, 2010 (consolidated to April 18, 2023), s. 8 (read 2026-11-08)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The PDF is a scan with an embedded text layer of mixed quality (some words are garbled); the zoning maps are Schedules D and E, published as separate PDFs. The M4 Aquaculture zone is listed in Table 3-1 but section 21 is marked deleted by Bylaw 790, so it is not listed here. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Logan Lake zones · Report an error