R.4 zone in Lumby: Residential Manufactured Home Subdivision

Lumby, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-08

In short

Main uses: Accessory buildings and structures, Manufactured homes, Single family dwellings, Community Care Facilities.

Zone rules

Main uses	Accessory buildings and structures Manufactured homes Single family dwellings Community Care Facilities
Also allowed (secondary uses)	Secondary Suites Home Occupations
Minimum lot area	560 m² (corner lots 650 m²)
Minimum lot width	18 m (corner lots 21 m)
Maximum lot coverage	35% of the lot, and 45% with driveways and parking areas; up to 60% with permeable surfaces
Maximum density	One manufactured home, or one single family dwelling which may contain a secondary suite; two accessory residential buildings
Maximum height	8 m (Community Care Facilities 10 m)
Front setback	8 m for manufactured homes, single family dwellings and Community Care Facilities
Rear setback	8 m for manufactured homes and single family dwellings
Interior side setback	2 m for manufactured homes and single family dwellings; 8 m for Community Care Facilities
Street side setback	5 m
Other rules	Buildings must be at least 3 m from any other building A manufactured home must be certified by the Canadian Standards Association to CSA Standard Z240 Minimum floor area: manufactured home 45 m², single family dwelling 60 m²

Source: Zoning Bylaw No. 750, 2012 (consolidated with amendments for convenience only, through Bylaw No. 897, 2024), s. 1204 (read 2026-11-08)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only. Zone R.7 appears in the bylaw body but is missing from the zone list in s. 103. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Lumby zones · Report an error