M-2 zone in Nakusp: Heavy Industrial
A range of general industrial uses.
Zone rules
| Purpose | A range of general industrial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 6,000 m² |
| Minimum lot width | 10% of the total perimeter of the parcel |
| Maximum lot coverage | 80% |
| Maximum height | 10.0 m |
| Maximum height, accessory buildings | 7.3 m |
| Front setback | 7.5 m; 9.0 m where separated by a road from residential zones |
| Rear setback | 3.0 m; 9.0 m where abutting residential zones |
| Interior side setback | 3.0 m; 6.0 m where abutting residential zones |
| Street side setback | 6.0 m; 9.0 m where abutting residential zones |
| Other rules |
|
Source: Zoning Bylaw No. 729, 2023 (consolidated November 2024), s. 6.14 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Village's consolidation table lists amending bylaws up to No. 744, 2024 (adopted November 25, 2024). Bylaw 755 (an R-3 amendment) appears on the RDCK zoning map but is not in this consolidation. The Village says bylaws on its site are provided for information only and are subject to amendment. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Nakusp zones · Report an error