GovHandbook

R3 zone in Nanaimo: Island Residential

Nanaimo, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Low density residential development of a permanent nature on Protection Island.

Zone rules

PurposeLow density residential development of a permanent nature on Protection Island.
Main usesSingle Residential Dwelling
Also allowed (secondary uses)
  • Boarding & Lodging
  • Daycare
  • Home Based Business
  • Secondary Suite
  • Short-Term Rental
Minimum lot area5,000 m²
Minimum lot width15 m
Maximum lot coverage35%
Maximum densityOne single residential dwelling with a total Floor Area Ratio of no greater than 0.55
Maximum height7 m (flat roof, under 4:12 pitch); 9 m (sloped roof, 4:12 pitch or steeper)
Front setback6.0 m
Rear setback7.5 m
Interior side setback1.5 m
Street side setback4.0 m
Other rules
  • Garage doors and carport entrances facing a street must be set back at least 6 m where the principal use is a single residential dwelling or duplex (or the lot is R5)
  • An extra 2.5 m front and/or flanking side setback applies where a lot abuts a major road and the road widening has not been dedicated

Source: Zoning Bylaw No. 4500 (consolidated 2026-MAR-23), s. Part 7 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The bylaw is organised by part (one part per zone family, with shared use and regulation tables), so zone line ranges cover the whole part. CD3 is deleted in the bylaw. Zones R1a and R1b are subzones of R1 (R1 / R1a / R1b). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Nanaimo zones · Report an error