CM-1 zone in New Westminster: Commercial Industrial Districts
In short
Allow commercial industrial uses.
Zone rules
| Purpose | Allow commercial industrial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Accessory buildings and uses |
| Maximum lot coverage | 40% of the site (all principal buildings in total) |
| Maximum density | Floor space ratio 0.75 |
| Maximum height | Six storeys or 80 feet (24.38 metres), whichever is less |
| Front setback | 10 feet (3.05 metres) adjacent to open paved areas; 25 feet (7.62 metres) from any building or structure |
| Rear setback | 10 feet (3.05 metres); where the site abuts an (R) District lot, 20% of site depth but not more than 25 feet (7.62 metres) |
| Interior side setback | None required, except where the site abuts an (R) District lot or is separated by a street or lane (40% of building height up to 40 feet, plus 20% of height over 40 feet); any side yard provided must be at least 10 feet (3.05 metres) |
| Other rules | The portion of a building over 30 feet (9.14 metres) high must be set back at least 30% of that portion's height from the street centre line (front), and 40% from rear and side lines |
Source: Zoning Bylaw No. 6680, 2001 (consolidated as of June 8, 2026), s. 562 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City publishes the complete bylaw as a single PDF, consolidated as of June 8, 2026; it also publishes each part separately. The saved text includes the list of amendments and appendices. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all New Westminster zones · Report an error