A-2 zone in Northern Rockies: Agriculture - Small Holdings
Allow for small scale, hobby agricultural activities where the dominant land Use is for Agriculture activities, in addition to a limited number of specific Accessory Uses.
Zone rules
| Purpose | Allow for small scale, hobby agricultural activities where the dominant land Use is for Agriculture activities, in addition to a limited number of specific Accessory Uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 4.0 ha |
| Minimum lot width | 100.0 m |
| Maximum lot coverage | 10% |
| Maximum density | Where a Building is being used for an Agriculture Use, it is considered a Principal Use, and more than one (1) principal building may be sited on the Parcel. |
| Maximum height | 11.0 m |
| Maximum height, accessory buildings | 12.0 m |
| Front setback | 6.0 m |
| Rear setback | 6.0 m |
| Interior side setback | 6.0 m |
| Street side setback | 6.0 m |
| Accessory building setbacks | exterior side 6.0 m, interior side 6.0 m, rear 6.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 119, 2016 (Townsite), office consolidation May 2026, s. 7.2 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The Regional Municipality has two zoning bylaws: this one for the Fort Nelson townsite, and Rural Zoning Bylaw No. 137, 2017 (office consolidation December 2024, https://nr.civicweb.net/document/125394/) for the Rural Official Community Plan area; the rural zones below carry that bylaw as source_url, and their pdf_page numbers are pages of that PDF. Both are office consolidations "not the official version of the bylaw". Codes C-1, C-2, RR-1, RR-2 and A-1/A-2 vs A exist in both bylaws with different meanings. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Northern Rockies zones · Report an error