RM1 zone in Oliver: Residential Medium Density One
Comprehensively designed low profile multiple attached housing up to three storeys high.
Zone rules
| Purpose | Comprehensively designed low profile multiple attached housing up to three storeys high. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots |
|
| Minimum lot area | 1.0 ha (not on municipal sewer); 670.0 m² (on municipal sewer), for subdivision |
| Minimum lot width | 20.0 metres (for subdivision) |
| Maximum lot coverage | 50% |
| Maximum density | No unit density limit (N/A); floor area ratio 0.80 |
| Maximum height | 11.0 m |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 4.5 m |
| Rear setback | 6.0 m |
| Interior side setback | 2.4 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | front 4.5 m, rear 3.0 m, interior side 2.4 m, exterior side 3.0 m |
| Other rules |
|
Source: Town of Oliver Zoning Bylaw 1423 (adopted June 24, 2024), s. 11.1 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. This is the Town's bylaw library copy (Laserfiche portal, DocView id 36093). The text carries only the 2024 adoption dates and no consolidation notice, so later amendments may not be included. Schedule B (zoning map) and Schedule C (floodplain map) are separate documents. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Oliver zones · Report an error