RS-2 zone in Parksville: Medium Density Residential
A mix of low and medium density housing, allowing a variety of housing types and secondary suites.
Zone rules
| Purpose | A mix of low and medium density housing, allowing a variety of housing types and secondary suites. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | 463 Hirst Avenue West (Strata Lots 1 to 20, District Lot 106, Nanoose District, Plan EPS7692): no more than 20 multiple family units in total |
| Minimum lot area | 560 m² |
| Maximum lot coverage | 33% (single family or duplex); 40% (multiple family residential) |
| Maximum density | 4 per lot or 30 per hectare, whichever is greater; floor area ratio 0.70 |
| Maximum height | 8.6 m |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 4.5 m (single family or duplex); 4.5 m (multiple family residential) |
| Rear setback | 3.0 m (single family or duplex); 6.0 m (multiple family residential) |
| Interior side setback | 1.6 m (single family or duplex); 6.0 m (multiple family residential) |
| Street side setback | 4.5 m (single family or duplex); 4.5 m (multiple family residential) |
| Accessory building setbacks | front 4.5 m, rear 1.2 m, exterior side 3.0 m, interior side 0.6 m |
| Other rules |
|
Source: Zoning and Development Bylaw, 1994, No. 2000 (consolidated to July 29, 2026), s. 203 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The PDF is marked "Consolidated only for convenience". Zone sections are in Division 200. CD-15 and several other CD numbers no longer exist (repealed or never used), so they are not listed. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Parksville zones · Report an error