M2 zone in Port Alberni: Medium Industry
To establish and maintain areas for both light and medium industrial uses, including uses that require outdoor storage.
Zone rules
| Purpose | To establish and maintain areas for both light and medium industrial uses, including uses that require outdoor storage. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 930 m² (10,011 ft²); automobile wrecking yard 1 hectare (2.47 ac) |
| Minimum lot width | 30 m (98.4 ft) |
| Maximum lot coverage | 60% |
| Maximum height | 12.5 m (41 ft) |
| Front setback | 6 m (19.7 ft) |
| Rear setback | 3 m (9.8 ft) |
| Interior side setback | 6 m (19.7 ft) total; 0 m permitted on one side |
| Other rules |
|
Source: Zoning Bylaw No. 5105, 2024 (October 2026 update), s. 5.25 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City also posts each zone as a separate PDF and keeps a table of amendments at https://www.portalberni.ca/zoning-bylaw-no-5105-table-amendments. The CD6 zone (6123 Russell Place) is listed in section 5.1 but has no section in this PDF, so it is not in the zone list below. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Port Alberni zones · Report an error