GovHandbook

RM2 zone in Port Alberni: Medium Density Multi-Residential

Port Alberni, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

To provide for medium density multiple family residential development.

Zone rules

PurposeTo provide for medium density multiple family residential development.
Main uses
  • Boarding and lodging
  • Community care facility
  • Multi-residential dwellings
  • Single detached dwelling
  • Semi-detached dwelling
Also allowed (secondary uses)Home occupation
Minimum lot area840 m² (9,043 ft²)
Minimum lot width25 m (82.0 ft)
Maximum lot coverage50%
Maximum densityFloor area ratio 0.8
Maximum height12.5 m (41.0 ft)
Front setback6 m (19.7 ft)
Rear setback9 m (29.5 ft)
Interior side setback5 m (16.4 ft)
Other rules
  • Usable open space of at least 45 m² (484.4 ft²) per dwelling unit with 3 or more bedrooms, and 18 m² (193.3 ft²) per smaller unit.
  • Groups of single and semi-detached or multi-residential dwellings are permitted.
  • Single and semi-detached dwellings must follow the R zone regulations (Sections 5.10.2 and 5.10.3).

Source: Zoning Bylaw No. 5105, 2024 (October 2026 update), s. 5.12 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City also posts each zone as a separate PDF and keeps a table of amendments at https://www.portalberni.ca/zoning-bylaw-no-5105-table-amendments. The CD6 zone (6123 Russell Place) is listed in section 5.1 but has no section in this PDF, so it is not in the zone list below. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Port Alberni zones · Report an error