R1 zone in Port Edward: Single Family Residential
Main uses: Single Family Dwelling.
Zone rules
| Main uses | Single Family Dwelling |
|---|---|
| Also allowed (secondary uses) |
|
| Minimum lot area | 500 m² |
| Minimum lot width | 15 m |
| Maximum lot coverage | 40% of the Lot Area |
| Maximum height | 11 m |
| Front setback | 4 m |
| Rear setback | 5 m |
| Interior side setback | 1.5 m |
| Street side setback | 3 m (corner lot) |
| Accessory building setbacks | front 4 m, rear 1.5 m, side 1.5 m (3 m on the exterior side of a corner lot) |
| Other rules | Each Single Family Dwelling must have at least 100 m² of floor area |
Source: District of Port Edward Zoning Bylaw No. 713, 2020 (consolidated, file dated 2023), s. Part 5 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District says its web copies are provided as-is and the certified copy at the District office is the only valid one. Zones in Part 5 are not numbered; the zone maps are Schedule B (District) and Schedule C (Townsite). PRPA land use is under federal jurisdiction. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Port Edward zones · Report an error