M3 zone in Powell River: Millsite Industrial
Areas exempted from City land use regulation under the 1955 Powell River District Incorporation Act, and lands used with Millsite operations
Zone rules
| Purpose | Areas exempted from City land use regulation under the 1955 Powell River District Incorporation Act, and lands used with Millsite operations |
|---|---|
| Main uses | Industrial use (uses consistent with Section 21 of the Powell River District Incorporation Act, 1955) |
| Minimum lot area | 1100 m² |
| Minimum lot width | 25 m (lot depth at least 30 m) |
| Maximum height | 15 m |
| Front setback | 7.5 m |
| Rear setback | 6 m; 9 m where the lot abuts an R or A zone lot |
| Interior side setback | 3 m on each side |
Source: Zoning Bylaw 2100, 2006 (consolidated May 15, 2025), s. 11.3 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City prepared this consolidation for convenience only and does not represent that it is up to date or complete; confirm against the original bylaws and their amendments. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Powell River zones · Report an error