C8 zone in Prince George: Commercial Conversion
Provide for the conversion and replacement of older dwellings to a limited range of non-retail commercial uses.
Zone rules
| Purpose | Provide for the conversion and replacement of older dwellings to a limited range of non-retail commercial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 600 m² (maximum lot area 3,000 m²) |
| Minimum lot width | 18.0 m |
| Maximum lot coverage | 30% |
| Maximum density | One principal building per site |
| Maximum height | 10.0 m |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 4.5 m |
| Rear setback | 6.0 m |
| Interior side setback | 1.2 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | front 4.5 m, interior side 1.2 m, exterior side 3.0 m, rear 1.2 m |
| Other rules |
|
Source: Zoning Bylaw No. 7850, 2007 (consolidated version, revised October 5, 2026), s. 11.8 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this version is consolidated for convenience. Zone sections that share a heading cover variant codes (AR3m, RS1m, RS2m, RM9r, C1c/C1l, C2c, C4c/C4l/C4lc, C6c/C6l/C6lc, M1n, M2n, M3n, M5n). Sections 10.5 (deleted), 15.13 (Z13 not in the bylaw) and 15.18 (Z18, deleted by Bylaw 9466) are not zones. Schedule A, the zoning map, is the zoning layer in PGMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Prince George zones · Report an error