M-1 zone in Quesnel: Light Industrial
In short
Light industrial uses.
Zone rules
| Purpose | Light industrial uses. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | M-1 parcels with frontage on and access onto Campbell Crescent: equipment and machinery repair is added as a principal permitted use. |
| Minimum lot area | 669 m² (7,200 ft²) with community sewer and water; 1600 m² (17,222 ft²) with community sewer but no community water; 1 ha (2.47 ac) with no community sewer |
| Minimum lot width | 20 m (66 ft) |
| Maximum lot coverage | 75% |
| Maximum height | 23 m (75 ft) |
| Front setback | 7.5 m (25 ft) |
| Rear setback | 0.0 m, except 7.5 m when abutting another zone |
| Interior side setback | 0.0 m, except 7.5 m when abutting another zone |
| Street side setback | 4.5 m (15 ft) |
| Other rules |
|
Source: Zoning Bylaw No. 1980, s. 30 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City's Zoning & Land Use page also links an excerpted zoning map PDF (Schedule B). The Schedule B pages inside this PDF are headed "Zoning Bylaw No. XXXX of 2025". Table 6.1 of the bylaw omits zone C-4A, but section 25 of the bylaw establishes it. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Quesnel zones · Report an error