RM-1 zone in Quesnel: Multi-Unit Residential (Low Density)
In short
Low density multi-unit housing on serviced urban lots.
Zone rules
| Purpose | Low density multi-unit housing on serviced urban lots. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot width | 20 m (66 ft) |
| Maximum lot coverage | 45%, provided that the maximum coverage of buildings, driveways and parking areas is 70% |
| Maximum density | 40 dwelling units per ha (16 dwelling units per ac); gross floor area ratio 0.5 |
| Maximum height | 11 m (36 ft) |
| Maximum height, accessory buildings | 7 m (23 ft) |
| Front setback | 7.5 m (25 ft) |
| Rear setback | 3.0 m (10 ft) |
| Interior side setback | 3.0 m (10 ft) |
| Street side setback | 3.0 m (10 ft) |
| Other rules |
|
Source: Zoning Bylaw No. 1980, s. 15 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City's Zoning & Land Use page also links an excerpted zoning map PDF (Schedule B). The Schedule B pages inside this PDF are headed "Zoning Bylaw No. XXXX of 2025". Table 6.1 of the bylaw omits zone C-4A, but section 25 of the bylaw establishes it. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Quesnel zones · Report an error