R-LD5 zone in Revelstoke: Low Density Residential – Manufactured Home and Ground-Oriented Dwelling Zone
Low density manufactured homes and ground-oriented dwellings (single-detached, two-unit, triplexes, fourplexes) on subdivided urban sized lots
Zone rules
| Purpose | Low density manufactured homes and ground-oriented dwellings (single-detached, two-unit, triplexes, fourplexes) on subdivided urban sized lots |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 350.0 m² (175.0 m² for party-wall subdivision) |
| Minimum lot width | 11.0 m (12.5 m corner lot); party-wall subdivision 5.5 m (7.0 m corner lot) |
| Maximum lot coverage | 50% for buildings; 65% including impermeable surfaces |
| Maximum density | One of: a manufactured home with one accessory dwelling unit; a single-detached dwelling with one accessory dwelling unit; a two-unit dwelling with at most one secondary suite per dwelling; or a multi-unit dwelling with at most four dwelling units |
| Maximum height | 8.0 m, except 10.0 m for multi-unit dwellings |
| Front setback | 4.5 m |
| Rear setback | 4.5 m |
| Interior side setback | 1.5 m, 0.0 m for shared common walls |
| Street side setback | 3.0 m |
| Other rules | Multi-unit dwellings need at least 15.0 m² of usable open space per dwelling unit |
Source: Zoning Bylaw No. 2406, 2025 (consolidated copy including amendment bylaws 2416 to 2449; latest amendment adopted September 22, 2026), s. 6.5 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City's consolidation is for convenience only; it has no legislative sanction and the original bylaw must be consulted. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Revelstoke zones · Report an error