R-2 zone in Rossland: Medium Density Residential
Infill or new apartment developments of five or more dwelling units.
Zone rules
| Purpose | Infill or new apartment developments of five or more dwelling units. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) | Accessory Buildings and Uses |
| Minimum lot area | 750 m² |
| Minimum lot width | 18 m |
| Maximum lot coverage | 60% buildings; 65% total surfaces |
| Maximum density | Floor area ratio 1.0; up to 1.5 with a density bonus if at least 20% of units are Affordable Housing |
| Maximum height | 13.0 m or 4 storeys, whichever is less |
| Maximum height, accessory buildings | 4.5 m |
| Front setback | 4.0 m |
| Rear setback | 4.0 m |
| Interior side setback | 3.0 m |
| Street side setback | 3.0 m |
Source: Zoning Bylaw No. 2864, 2026 (consolidated to October 2026, including Bylaw 2872), s. 8.4 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City's consolidation is for convenience only and is not admissible in court unless certified by the Corporate Officer; the original bylaw prevails. Bylaw 2864 was adopted July 13, 2026 and replaced Zoning Bylaw 2518. The bylaw says zone locations are shown on the City's Interactive City Map; Schedule B zoning map PDF is civicweb document 54624. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Rossland zones · Report an error