RD-1 zone in Saanich: Two Family Dwelling Zone
Main uses: Single Family Dwelling, Small-Scale Multi-Unit Housing.
Zone rules
| Main uses |
|
|---|---|
| Also allowed (secondary uses) |
|
| Minimum lot area | 750 m² |
| Minimum lot width | 20 m, or 1.3 times the minimum lot width of the largest adjacent single family dwelling zone, whichever is greater |
| Maximum lot coverage | 30% of the lot area (all buildings) |
| Maximum density | Floor Space Ratio of 0.50 |
| Maximum height | 7.5 m; 6.5 m for flat roofs or roofs with a pitch less than 3:12 |
| Maximum height, accessory buildings | 3.75 m |
| Front setback | 7.5 m |
| Rear setback | 10.5 m |
| Interior side setback | 3.0 m, provided the sum of both side yards is at least 30% of the lot width measured at the front building line |
| Street side setback | 4.5 m |
| Accessory building setbacks | front 7.5 m, rear 1.5 m, interior side 3.0 m, exterior side 4.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 8200 (Saanich, September 2003; office consolidation current on the District website, amendments include B. 10058 2025), s. 301 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District publishes the whole bylaw as one PDF and a separate Zoning Bylaw Amendment List (https://www.saanich.ca/assets/Local~Government/Documents/Planning/Zoning%20Bylaw%208200%20Amendments.pdf). Each zone is a numbered Schedule (e.g. Schedule 101 = zone A-1); the 'section' field holds the schedule number. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Saanich zones · Report an error