RM-1 zone in Salmo: Multi-Family Residential
In short
Provide an area for a mix of multi-family and single-family residential housing.
Zone rules
| Purpose | Provide an area for a mix of multi-family and single-family residential housing. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 334.5 m² (3,600 ft²) for a single-family dwelling on an existing 9.14 m (30’) wide lot; 501.7 m² (5,400 ft²) for a dwelling on a 13.7 m (45’) wide lot; 657.8 m² (7,080 ft²) for a single-family dwelling on an existing 18 m (59’) wide lot; 836 m² (8,999 ft²) for other permitted uses |
| Minimum lot width | 9.14 m (30’) for existing lots; 13.7 m (45’) for a new lot for a single-family dwelling |
| Maximum lot coverage | 60% of the site (multi-family, two-family, mixed-use and secondary uses, including driveways and parking areas); 33% (single-family) |
| Maximum density | Multi-family or mixed-use: 60 dwelling units per hectare (24 units per acre); 74 units per hectare (30 units per acre) with underground parking |
| Maximum height, accessory buildings | Stand-alone garage for RV storage: up to 7 m (23’) high |
| Front setback | 7.6 m (24’11”) |
| Rear setback | 4.5 m (14’9”) |
| Interior side setback | 1.5 m (4’11”) |
| Street side setback | 4.5 m (14’9”) |
| Accessory building setbacks | front 4.5 m, exterior side 4.5 m, rear 1.5 m, interior side 1.5 m |
| Other rules |
|
Source: Zoning Bylaw No. 773, 2026, s. 5.6 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Adopted October 27, 2026; repeals Land Use Bylaw No. 489, 2001. The Village labels this PDF its website copy. The zoning map is Schedule B (one page, an image with no text layer). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Salmo zones · Report an error