R1 zone in Stewart: Residential Single Family
Main uses: Dwelling, Single Family, Dwelling, Duplex.
Zone rules
| Main uses |
|
|---|---|
| Also allowed (secondary uses) |
|
| Minimum lot area | 350 m² (single family, new subdivisions); 700 m² (duplex on one parcel); 350 m² (duplex divided into two parcels with a common interior wall) |
| Minimum lot width | 15.0 m (single family); 18.0 m (duplex on one parcel); 9.0 m per parcel (duplex divided into two parcels with a common interior wall) |
| Maximum lot coverage | 33% |
| Maximum density | 2 dwelling units per parcel |
| Maximum height | 10.0 m |
| Maximum height, accessory buildings | 5.0 m |
| Front setback | 4.0 m |
| Rear setback | 2.0 m |
| Interior side setback | 2.0 m (0.0 m on the line that divides a duplex) |
| Street side setback | 3.0 m |
| Other rules |
|
Source: District of Stewart Zoning Bylaw No. 881, 2014 (original, October 2014) with amending bylaws 925/2018, 923/2018, 928/2018, 958/2019, 985/2021, 994/2022, 1023/2024, 1026/2024, s. 5.0 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District publishes no consolidation, only the original bylaw and each amending bylaw in its document center (https://districtofstewart.civicweb.net/filepro/documents/136). Amending bylaw 958 (R1 to C2) has no text layer (scanned image only). The 2019 zoning map legend also shows "General Commercial/Work Camp" and "Cannabis Manufacturing and Production" zones that are not in the bylaw text or any amending bylaw found; the second pass should look for them. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Stewart zones · Report an error