R-1 zone in Taylor: Low Density Residential
Low density housing: single detached dwellings and small-scale infill such as secondary dwellings and duplexes, fitting existing neighbourhood character.
Zone rules
| Purpose | Low density housing: single detached dwellings and small-scale infill such as secondary dwellings and duplexes, fitting existing neighbourhood character. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 800 m² |
| Minimum lot width | 20.0 m (duplex); 15.0 m (single detached) |
| Maximum lot coverage | 50% |
| Maximum density | 2 dwelling units |
| Maximum height | 10.0 m |
| Maximum height, accessory buildings | 7.0 m |
| Front setback | 6.0 m |
| Rear setback | 3.0 m |
| Interior side setback | 1.5 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | front 6.0 m, interior side 1.5 m, exterior side 3.0 m, rear 2.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 898, 2025 (Second Reading Version), s. 11.0 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The zone details come from the unsigned second-reading version posted on the District's civicweb host, because the adopted Zoning-Bylaw.pdf (March 2026) on the District site is a scan with no text layer. The adopted bylaw may differ. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Taylor zones · Report an error