RS-3 zone in Vanderhoof: Suburban Residential - Mixed
Main uses: Manufactured home, Single-family dwelling.
Zone rules
| Main uses |
|
|---|---|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,672 m² |
| Minimum lot width | 10% of the perimeter of the parcel |
| Maximum density | 1 principal residential use per parcel plus 1 secondary residential use; an additional special needs unit is allowed under a housing agreement |
| Maximum height | 11.0 m (principal building or any structure) |
| Front setback | 7.0 m |
| Rear setback | 7.0 m |
| Interior side setback | 1.5 m |
| Street side setback | 5.0 m |
| Accessory building setbacks | front: no closer to the front parcel line than the front wall of the principal building; rear 1.5 m; interior side 1.5 m; exterior side 5.0 m |
| Other rules |
|
Source: Zoning Bylaw No. 1230, 2020 (consolidated version including amendments as of July 13, 2026) (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District's consolidated copy is for convenience only; users are asked to refer to the Zoning Bylaw as amended to verify accuracy and completeness. Zones have no section numbers (headings only), shown under Part 8. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Vanderhoof zones · Report an error