INDA zone in Vernon: Airport Industrial
In short
Development and operation of an airport and associated industrial services.
Zone rules
| Purpose | Development and operation of an airport and associated industrial services. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 2,025 m² (0.5 ac) |
| Minimum lot width | 25 m |
| Maximum lot coverage | 90% |
| Maximum height | Airport Industrial Buildings 10 m; airport facilities and structures: height set by the Regional Airport Zoning Regulations Bylaw No. 4578; mechanical structures unrestricted |
| Front setback | 6.0 m (abutting a street) |
| Rear setback | 4.5 m (abutting a laneway or alley) |
| Interior side setback | 10.0 m next to a housing-based lot; 0.0 m next to a non-housing-based lot; 0.0 m at a party wall |
| Street side setback | 6.0 m (abutting a street) |
| Other rules | One Security or Operator Dwelling Unit is permitted on a lot |
Source: Zoning Bylaw No. 6000 (2024), consolidated for convenience (amendments through Bylaw 6083), s. 12.2 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Marked "Consolidated for Convenience" by the City. The amendment table lists bylaws up to 6083 and 6075 (dated September 2026); the adopted bylaw prevails. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Vernon zones · Report an error