R99 zone in Coldstream: Residential Bed & Breakfast Zone
Accommodate a Bed & Breakfast use on a fully serviced lot previously zoned for it, within a Single-Detached Dwelling and under a valid Business Licence.
Zone rules
| Purpose | Accommodate a Bed & Breakfast use on a fully serviced lot previously zoned for it, within a Single-Detached Dwelling and under a valid Business Licence. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 600 m² |
| Minimum lot width | Corner lot 15 m; interior lot 12 m |
| Maximum lot coverage | 50% for all buildings and structures; 15% for impervious hard-surfaced areas |
| Maximum density | Single-Detached Dwelling with a Secondary Suite and Bed & Breakfast use; or Single-Detached Dwelling with up to 3 ADUs; Duplex with up to 2 ADUs; Triplex with up to 1 ADU; or Fourplex |
| Maximum height | 11 m or 3 storeys |
| Maximum height, accessory buildings | Accessory building or structure 4.5 m; Carriage House ADU 8 m or 2 storeys; Garden Suite ADU 4.5 m or 1 storey |
| Front setback | 6 m |
| Rear setback | 6 m (principal building) |
| Interior side setback | 1.5 m |
| Street side setback | 4 m |
| Accessory building setbacks | rear 1.5 m (accessory buildings and structures); 3 m between buildings |
| Other rules |
|
Source: Zoning Bylaw No. 1838, 2024 (consolidated for convenience, includes amendments adopted up to June 8, 2026), s. 599 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The District marks the consolidation "for convenience only". The zones are in Schedule A (the url above); the cover and enacting bylaw are at http://coldstream.civicweb.net/Documents/DocumentDisplay.aspx?Id=56951 and the zoning map is Schedule B. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Coldstream zones · Report an error