RM1A zone in Colwood: Medium Density Attached Housing

Colwood, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Main uses: Attached housing.

Zone rules

Main uses	Attached housingUses in Section 2.1.10 are also permitted.
Also allowed (secondary uses)	Accessory buildings and structures Accessory dwelling unit
Minimum lot area	1,800 square metres (minimum lot that may be created by subdivision)
Minimum lot width	18 m (highway frontage and lot width created by subdivision)
Maximum lot coverage	35 percent of the lot
Maximum density	One dwelling unit per 370 square metres of lot area
Maximum height	9 m
Front setback	7.5 m
Rear setback	10 m
Interior side setback	6 m
Street side setback	7.5 m on a corner lot next to a flanking street
Other rules	Buildings no more than 50 m wide or six units, whichever is less; each dwelling unit at least 50 square metres and 6 m wide; no unit above another At least 5 percent of the lot must be usable open space Panhandle lots not permitted for subdivision

Source: Colwood Land Use Bylaw No. 151, 1989 (with amendments to August 24, 2026), s. 6.1A (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the original bylaws should be consulted for interpretation and application. Colwood's zoning bylaw is called the Land Use Bylaw. Zone sections for CD zones from 10.5 onward are numbered with roman-numeral page footers in the document; pdf_page is the PDF page. No Section 10.28 exists in the consolidation. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Colwood zones · Report an error