RM1B zone in Colwood: Medium Density Attached Housing B
Main uses: Attached housing.
Zone rules
| Main uses | Attached housingUses in Section 2.1.10 are also permitted. |
|---|---|
| Also allowed (secondary uses) |
|
| Minimum lot area | 1,800 square metres (minimum lot that may be created by subdivision) |
| Minimum lot width | 18 m (highway frontage and lot width created by subdivision) |
| Maximum lot coverage | 35 percent of the lot |
| Maximum density | One dwelling unit per 350 square metres of lot area |
| Maximum height | 9 m |
| Front setback | 7.5 m |
| Rear setback | 10 m |
| Interior side setback | 6 m |
| Street side setback | 7.5 m on a corner lot next to a flanking street |
| Other rules |
|
Source: Colwood Land Use Bylaw No. 151, 1989 (with amendments to August 24, 2026), s. 6.1B (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the original bylaws should be consulted for interpretation and application. Colwood's zoning bylaw is called the Land Use Bylaw. Zone sections for CD zones from 10.5 onward are numbered with roman-numeral page footers in the document; pdf_page is the PDF page. No Section 10.28 exists in the consolidation. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Colwood zones · Report an error