RT-3 zone in Coquitlam: Multiplex Residential
Ground-oriented infill residential development on larger lots.
Zone rules
| Purpose | Ground-oriented infill residential development on larger lots. |
|---|---|
| Main uses | Multiplex residential |
| Also allowed (secondary uses) |
|
| Minimum lot area | 930 m2; or 740 m2 where the lot was rezoned to RT-3 before July 08, 2019 |
| Maximum lot coverage | 50% |
| Maximum density | Floor area of 0.85 times the lot area (underground parking and certain underground storage and service areas excluded) |
| Maximum height | 9.5 m; or 11.0 m for roofs with a pitch of 3 in 12 or greater over at least 80% of roof surfaces |
| Maximum height, accessory buildings | 3.7 m; or 4.6 m for an accessory building with a roof pitch of 4 in 12 or greater over at least 80% of roof surfaces |
| Front setback | 4.5 m |
| Rear setback | 6.0 m |
| Interior side setback | 1.2 m |
| Street side setback | 3.0 m |
| Accessory building setbacks | Detached accessory buildings sited 1.6 m or more from the house, in the rear yard: front 4.5 m, rear 1.2 m, interior side 1.2 m, exterior side 3.0 m; attached or closer than 1.6 m: same as the house |
| Other rules |
|
Source: Zoning Bylaw No. 3000, 1996 (consolidated with amending bylaws, updated July 27, 2026), s. 2207 (read 2026-11-07)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City says this consolidated copy is for convenience only and is not an official copy. It is published as separate PDFs per part (Parts 1-22); no zone parts exist for 9, 11 and 14. Schedule A (zoning maps) points to QtheMap. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Coquitlam zones · Report an error