I-2 zone in Cumberland: Industrial
In short
Intensive industrial development; preserves land for industry.
Zone rules
| Purpose | Intensive industrial development; preserves land for industry. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Minimum lot area | 7,500 m² |
| Minimum lot width | 30.0 m |
| Maximum lot coverage | 60% (70% including impermeable surfaces); greenhouses are exempt from lot coverage |
| Maximum density | 1 dwelling unit per lot (as a caretaker suite); FAR 0.75 |
| Maximum height | 12.0 m |
| Maximum height, accessory buildings | 15.0 m |
| Front setback | 7.5 m |
| Rear setback | 7.5 m |
| Interior side setback | 7.5 m |
| Street side setback | 7.5 m |
| Accessory building setbacks | front 7.5 m, rear 7.5 m, side 7.5 m, exterior side 7.5 m |
| Other rules | Accessory buildings: combined maximum floor area 10% of lot area |
Source: Zoning Bylaw No. 1238, 2025 (consolidated July 27, 2026), s. 12.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; if there are discrepancies the amendment bylaws prevail. Zones are grouped by Part, so each zone's lines range covers its whole Part (shared tables). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Cumberland zones · Report an error