I-3 zone in Cumberland: Refuse Industrial
In short
Accommodates the Comox Valley Regional District (CVRD) Waste Facility.
Zone rules
| Purpose | Accommodates the Comox Valley Regional District (CVRD) Waste Facility. |
|---|---|
| Main uses |
|
| Also allowed (secondary uses) |
|
| Extra uses on specific lots | Refuse disposal facility is not permitted (except a leachate equalization pond) in the northern portion of LOT A, SECTIONS 26, 27, 34 AND 35, TOWNSHIP 10, COMOX DISTRICT, PLAN EPP111857 (Comox Valley Waste Management Centre), as shown in Figure 12-1 |
| Minimum lot area | 7,500 m² |
| Minimum lot width | 10% of lot perimeter |
| Maximum lot coverage | 50% |
| Maximum density | 1 dwelling unit per lot (as a caretaker suite); FAR 0.75 |
| Maximum height | 15.0 m |
| Maximum height, accessory buildings | 15.0 m |
| Front setback | 7.5 m |
| Rear setback | 15.0 m |
| Interior side setback | 7.5 m |
| Street side setback | 7.5 m |
| Accessory building setbacks | front 7.5 m, rear 15.0 m, side 7.5 m, exterior side 7.5 m |
| Other rules | Accessory buildings: combined maximum floor area 10% of lot area |
Source: Zoning Bylaw No. 1238, 2025 (consolidated July 27, 2026), s. 12.1 (read 2026-11-08)
Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; if there are discrepancies the amendment bylaws prevail. Zones are grouped by Part, so each zone's lines range covers its whole Part (shared tables). Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.
This zone as Markdown · JSON · all Cumberland zones · Report an error