Granisle fence rules: permits and height limits
Do I need a permit to build a fence in Granisle, and how high can it be?
In Granisle a fence in a front yard may be up to 1 m high. Behind the required front yard it may be up to 1.8 m (2.4 m in industrial districts). Neither bylaw mentions a fence permit; confirm with the Village Office.
Key facts
| Permit | The Building Bylaw's definition of "Structure" specifically excludes fences, and no fence permit is mentioned in the Zoning Bylaw.Building Bylaw No. 412, 2009, s. 4 (definition of Structure) · Wording matched the official text retrieved 2026-11-08Official wordingspecifically excluding all other retaining structures, landscaping, fences and paving. |
|---|---|
| Height, front yard | 1 m (a fence or wall not greater than 1 m may be in a front yard).Zoning Bylaw No. 508, 2019, s. 3.13.4(a) · Wording matched the official text retrieved 2026-11-08Official wordingfences "orwalls not greater than 1 m may be located in |
| Height, side and rear yards | 1.8 m behind the required front yard in all zones except industrial; 2.4 m in industrial districts.Zoning Bylaw No. 508, 2019, s. 3.13.4(b), (c) · Wording matched the official text retrieved 2026-11-08Official wordingthan 1.8 m in height may be located on any lot to the rear of a In industrial districts, fences or hedges no greater than 2.4 metres |
| Corner lots and sightlines | Nothing over 0.6 m high (landscape feature or structure) in the sight triangle at an intersection, measured 6.0 m along each lot line from the corner.Zoning Bylaw No. 508, 2019, s. 3.15 · Wording matched the official text retrieved 2026-11-08Official wordingor structure exceeding 0.6 m in height shall be permitted within the sight |
| Other rules | Height is measured from average ground level 1 m from both sides. A retaining wall's portion above the supported ground counts as a fence. Where a lot's rear line abuts another lot's side line, the side-line height limit applies.Zoning Bylaw No. 508, 2019, s. 3.13 · Wording matched the official text retrieved 2026-11-08Official wordingThe height of a fence, wall or hedge will be measured from the That portion of a retaining wall which projects above the surface of the |
| Bylaw | Zoning Bylaw No. 508, 2019, s. 3.13 (Fence Heights) and s. 3.15 (Vision Clearance)Zoning Bylaw No. 508, 2019, s. 3.13 · Wording matched the official text retrieved 2026-11-08Official wordinglot line, nor nearer than 3 m from any principal building. 3.13 Fence Heights .1 The height of a fence, wall or hedge will be measured from the VILLAGEOF GRANISLE ZONING BYLAWNO. 508, 2019 TABLE OF CONTENTS |
How it works
Fence heights are set in section 3.13 of the Village of Granisle's Zoning Bylaw No. 508, 2019. The Building Bylaw excludes fences from its definition of a structure, and the Zoning Bylaw does not mention a fence permit. Confirm with the Village Office before you build.
Height limits
- Front yard: a fence or wall not greater than 1 m.
- Behind the required front yard: up to 1.8 m in all zones except industrial.
- Industrial districts: up to 2.4 m.
Good to know
- Height is measured from average ground level 1 m from both sides of the fence.
- The part of a retaining wall that rises above the ground it supports counts as a fence.
- Where one lot's rear line meets another lot's side line, the side-line height limit applies.
- On a corner, nothing over 0.6 m high (landscaping or structure) is allowed in the sight triangle, measured 6.0 m along each lot line from the corner (section 3.15).
- The bylaws read do not set rules for barbed wire, electric fences or pool fences. Ask the Village Office at 250-697-2248.
Official forms and pages
The same question in other places
Telkwa · Smithers · Houston · Burns Lake · New Hazelton · Hazelton
Sources
- Zoning Bylaw No. 508, 2019 (PDF), Village of Granisle (read 2026-11-08)
- Building Bylaw No. 412, 2009 (PDF), Village of Granisle (read 2026-11-08)
Checked by script, not yet by a person: the official wording behind 6 of 6 facts was matched to the official text. How answers are checked.