GovHandbook

RM1 zone in Kamloops: Multi-Unit 1 - Low Density

Kamloops, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Low-density Multi-Unit Residential development in the form of Single- and Two-Unit Dwellings.

Zone rules

PurposeLow-density Multi-Unit Residential development in the form of Single- and Two-Unit Dwellings.
Main usesMulti-Unit Residential consisting of Single-Detached and/or Two-Unit Dwellings
Also allowed (secondary uses)
  • Boarders or Lodgers, or Short-Term Rental Accommodation, subject to Division 3, Section 3.20
  • Daycare, Home-Based, in an existing Single-Detached Residential Dwelling
  • Home-Based Business, subject to Division 3, Section 3.3
  • Residential care facility licensed home-based, in an existing Single-Detached Residential Dwelling
  • Residential Suite, subject to Division 3, Section 3.4
Extra uses on specific lots
  • Two triplex Buildings on Lot B, Plan KAP51645 (770 Hugh Allan Drive)
  • A maximum of 42 units at 2000 Qu'Appelle Boulevard and 1939 Coldwater Drive (parts of the Northeast 1/4 of Sec. 34 and Lot C, Sec. 35, Twp. 19, Rge. 17)
Minimum lot area3,000 m²
Minimum lot width30 m
Maximum lot coverage40% of the parent parcel including accessory buildings; all accessory buildings on an individual bare land strata lot 12% of strata lot area, to a maximum of 80 m²
Maximum density25 dwelling units per ha (16 per ha, with at most 40% Two-Unit Dwellings, at 8855 Dallas Drive; 16 units per ha, 40 units, at 1799 Babine Drive)
Maximum heightSingle-Detached and Two-Unit Dwellings 2 Storeys; any structure 15 m
Maximum height, accessory buildingsOver 10 m² 4 m; under 10 m² 3 m
Front setback4.5 m (minimum perimeter yard setback for all yards of the parent parcel)
Rear setback4.5 m (minimum perimeter yard setback for all yards of the parent parcel)
Interior side setback4.5 m (minimum perimeter yard setback for all yards of the parent parcel)
Other rules
  • Building separation: principal buildings 3 m; accessory building from principal building 1.5 m
  • Manufactured Homes are not permitted
  • One accessory building per unit, maximum floor area 10 m², at the rear or side of a dwelling unit

Source: Zoning Bylaw No. 55 (consolidated, as amended; amendments listed to Bylaw 55-124, adopted October 27, 2026), s. 9.1 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. The City's consolidation is placed online for convenience only; it is not the official or legal version, and certified copies are available from Legislative Services at City Hall. Zone T2 (Airport), section 11.6, is repealed and not listed. The bylaw is also published one section per file at https://kamloops.civicweb.net/filepro/documents/138848. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Kamloops zones · Report an error