GovHandbook

MHP-1 zone in Ladysmith: Manufactured Home Park

Ladysmith, British ColumbiaDraft, not yet reviewedBylaw read 2026-11-07

In short

Accommodate manufactured home park communities.

Zone rules

PurposeAccommodate manufactured home park communities.
Main usesManufactured Home Park
Also allowed (secondary uses)
  • Caretaker Dwelling
  • Office
  • Recreation Activity Space
  • Home Based Business
Minimum lot area2.0 hectares for a Manufactured Home Park site; 300 square metres for an individual parcel
Maximum lot coverage38.0 percent
Maximum density20 units per hectare
Maximum height5.0 metres to the highest point of the roof
Maximum height, accessory buildings5.0 metres for a Recreation Activity Space; 3.5 metres for any other accessory building
Front setback4.5 metres
Rear setback3.0 metres
Interior side setback1.5 metres
Street side setback1.5 metres
Accessory building setbacksfront 6.0 metres; side (interior or exterior) 1.0 metre for up to 10.0 m² and 1.5 metres for over 10.0 m²; rear 1.0 metre for up to 10.0 m² and 1.5 metres for over 10.0 m²
Other rules
  • An individual manufactured home may have a floor area up to 223 square metres
  • At least three percent of the gross parcel area must be common recreation activity space
  • Mobile homes must be built in a factory to CSA Z240MH standards

Source: Town of Ladysmith Zoning Bylaw 2014, No. 1860, Schedule A - Zoning Bylaw Text (consolidated September 29, 2026), s. 10.9 (read 2026-11-07)

Rules in the bylaw's general sections (parking, fences, suites, home businesses) also apply, and a lot can have site-specific rules. Consolidated for convenience only; the consolidation is not a legal document and certified copies of the original bylaws should be consulted. R-2-D2 (10.6) is reserved for future use and has no zone text. Zone pages are taken from the bylaw text by a research agent and have not yet been reviewed by a person: confirm with the bylaw before you rely on them. How answers are checked.

This zone as Markdown · JSON · all Ladysmith zones · Report an error